List of KOMAG Researchers’ Publications

2018 year

Articles in Polish Magazines

  1. BAŁAGA D., KALITA M., SIEGMUND M., URBANEK A., WALOSZCZYK A.: Designing and testing the automatic water mist fire extinguishing system for belt conveyors. Drives and Control (Napędy Sterow.) 2018 No. 7/8 p. 60-67, ISSN 1507-7764.
  2. BAŁAGA D., KALITA M., SIEGMUND M., KLIMEK Z., URBANEK A., WALOSZCZYK A.: NEPTUN spraying system intended for reduction of airborne dust in KWK Bolesław Śmiały coal mine processing plant. Mining Machines (Masz. Gór.) 2018 No. 3 p. 35-46, ISSN 2450-9442.
  3. BARON R.: Concept for improvement of usability features of KOMAG classifying hydrocyclone. Mining Machines (Masz. Gór.) 2018 No. 1 p. 29-38, ISSN 2450-9442.
  4. CZERNIAK D., SZKUDLAREK Z.: Stand tests of mobile cleaning device of MUC type. (Masz. Gór.) 2018 No. 1 p. 14-28, ISSN 2450-9442.
  5. DEJA P.: Traction-battery drive of the electric mine locomotive. Electric Machines, Exercise – Books of Problems (Masz. Elektr., Zesz. Probl.) 2018 No. 119 p. 53-58, ISSN 0239-3646.
  6. DOBRZANIECKI P., KALITA M.: Possibility of using the neodymium magnets in machines and equipment clutches. Mining Machines (Masz. Gór.) 2018 No. 4 p. 27-38, ISSN 2450-9442.
  7. FIGIEL A.: Conditions for safe testing and taking measurements of electric non-electric parameters in the workings threatened by explosion hazard. Mining Machines (Masz. Gór.) 2018 No 1 p. 84-88, ISSN 2450-9442.
  8. FIGIEL A.: Ensuring the technical safety of mining machines and equipment. Mining Machines (Masz. Gór.) 2018 No. 2 p. 87-95, ISSN 2450-9442.
  9. FIGIEL A.: Procedures for repairing and overhauling the devices intended to be used in explosive atmospheres regarding the safety aspect. Mining Machines (Masz. Gór.) 2018 No. 3 p. 81-88 ISSN 2450-9442.
  10. FRIEBE P.: Stream-and-spiral separators for recovery of coal from coal fines. Mining Machines (Masz. Gór.) 2018 No. 2 p. 28-38, ISSN 2450-9442.
  11. GRYNKIEWICZ-BYLINA B., RAKWIC B.: Identification and assessment of hazards resulting from the structure of the wheeled child conveyances commercialized on the Polish market. J. Mach. Constr. Maint. 2018 No. 3 p. 107-121, ISSN 1232-9312.
  12. GRYNKIEWICZ-BYLINA B., RAKWIC B.: Safety of using the book toys intended for children. Paper Review (Prz. Pap.) 2018 No. 11 p. 734-740, ISSN 0033-2291.
  13. JASIULEK D.: Monitoring the operational parameters of a power roof support. Mach. Constr. Maint. 2018 No 2 p. 109-115, ISSN 1232-9312.
  14. JENDRYSIK S., STANKIEWICZ K., JASIULEK D.: KOMAG Innovative solutions in the jig node automation process. Mining Machines (Masz. Gór.) 2018 No. 2 s. 65-77, ISSN 2450-9442.
  15. KACZMARCZYK K.: Driving systems in manoeuvring drivetrains. Mining Machines (Masz. Gór.) 2018 No. 4 p. 39-47, ISSN 2450-9442.
  16. KALITA M.: Concept of a cycloidal gear intended for electric impact wrenches. Mining Machines (Masz. Gór.) 2018 No. 3 p. 57-66, ISSN 2450-9442.
  17. KALITA M., MAZURKIEWICZ A., TARKOWSKI A.: Design and strength verification of the battery and apparatus boxes for the mining mobile machine. Mining Machines (Masz. Gór.) 2018 No. 4 p. 3-18, ISSN 2450-9442.
  18. KANIA J., SZWEDA S., SZYGUŁA M.: Analysis of powered roof support withdrawal from the longwall panel in the safety aspect. Mining Machines (Masz. Gór.) 2018 No. 3 p. 23-34, ISSN 2450-9442.
  19. KAPUŚCIŃSKI D., POLNIK B.: An innovative power supply and control system for mining roadheading machine. Electric Machines, Exercise – Books of Problems (Masz. Elektr., Zesz. Probl.) 2018 No. 118 s. 129-135, ISSN 0239-3646.
  20. KONSEK R., DEJA P.: The new solution for the power supply and control system of mining auxiliary machines. Mining Machines (Masz. Gór.) 2018 No. 4 p. 67-77, ISSN 2450-9442.
  21. KOWOL D., MATUSIAK P., ŁAGÓDKA M.: Possibility of increasing the effectiveness of coking coal fines production by increasing separation efficiency in secondary beneficiation of middlings in a pulsating jig. Mining Machines (Masz. Gór.) 2018 No. 2 p. 53-64, ISSN 2450-9442.
  22. KURPIEL W.: Concept of the battery management system (BMS) with active balancing system. Mining Machines (Masz. Gór.) 2018 No. 1 p. 60-70, ISSN 2450-9442.
  23. KURPIEL W., MIEDZIŃSKI B.: Properties of lithium cells under operating conditions. info 2018 No. 10 p. 44-48, ISSN 1642-8722.
  24. MADEJCZYK W.: Determination of welded mesh claddings’ load-bearing capacity. Mining Machines (Masz. Gór.) 2018 No. 4 p. 19-26, ISSN 2450-9442.
  25. MAJEWSKI M.: Configuring the control circuits to increase safety of mining machines Part 1. Safety functions. Mining Machines (Masz. Gór.) 2018 No. 1 p. 71-83, ISSN 2450-9442.
  26. MAJEWSKI M.: Configuring the control circuits to increase safety of mining machines Part 2. Emergency stop. Mining Machines (Masz. Gór.) 2018 No. 2 p. 78-86, ISSN 2450-9442.
  27. MATUSIAK P., KOWOL D.: Development of KOMAG pulsatory jig. Mining Machines (Masz. Gór.) 2018 No. 2 p. 40-52, ISSN 2450-9442.
  28. MICHALSKI W., KOWAL L.: Mobile container platform – an innovative solution of vertical transport. Drives and Control (Napędy Sterow.) 2018 No. 11 p. 113-115, ISSN 1507-7764.
  29. NIEDWOROK A., MICHALAK J., ZYGMANOWSKI M.: The influence of AC ripple current component on warming up process of fixing cable elements. Electrotechnical Survey (Prz. Elektrotech.) 2018 No. 6 p. 115-120, ISSN 0033-2097.
  30. NIEŚPIAŁOWSKI K., RAWICKI N., WÓJCICKI M.: Closed circuit cooling unit for electric motors of a mining machine. Mining Machines (Masz. Gór.) 2018 No. 3 p. 47-56, ISSN 2450-9442.
  31. NIEŚPIAŁOWSKI K., RAWICKI N., WÓJCICKI M.: Mobile driving-and-pumping unit for cleaning the electric motors cooling systems used in the mining industry. Mining Machines (Masz. Gór.) 2018 No. 4 p. 58-66, ISSN 2450-9442.
  32. PIECZORA E., DOBRZANIECKI P.: About requirements for diesel drives used in hard coal mine underground working. Mining – Informatics, Automation and Electrical Engineering 2018 No. 2 p. 31-39, (40-48), ISSN 2449-6421.
  33. PIERCHAŁA M.: Testing the acoustic silencers. Arch. Acoust. 2018 No. 2 p. 313-321, ISSN 0137-5075.
  34. POLNIK B.: Universal electric drive system increasing the technical safety of mining machines. elektro.info 2018 No. 7-8 p. 24-27, ISSN 1642-8722.
  35. RAWICKI N., NIEŚPIAŁOWSKI K., WÓJCICKI M.: Automatic and semi-automatic filters for the mining industry. Mining Machines (Masz. Gór.) 2018 No. 1 p. 49-59, ISSN 2450-9442.
  36. SIEGMUND M., BAŁAGA D., KALITA M.: Testing the parameters of spraying stream form fine-drops nozzles. Mining Machines (Masz. Gór.) 2018 No. 3 p. 3-13, ISSN 2450-9442.
  37. STANKIEWICZ K.: Mining control systems and distributed automation. Mach. Constr. Maint. 2018 No. 2 p. 117-122, ISSN 1232-9312.
  38. SUFFNER H.: Cooling systems for exhaust gases of mine diesel drives intended for hard coal mines. Mining Machines (Masz. Gór.) 2018 No. 3 p. 67-80, ISSN 2450-9442.
  39. SZEWERDA K.: The concept of the numerical computing methods for analysis of operational conditions of bucket wheel excavators. Opencast Mining (Gór. Odkryw.) 2018 No. 4 p. 66-73, ISSN 0043-2075.
  40. SZYGUŁA M., MAZUREK K.: Hydraulic rescue support to be used in areas threatened by natural hazards. Mining Machines (Masz. Gór.) 2018 No. 3 p. 14-22, ISSN 2450-9442.
  41. ŚWIDER J., SZEWERDA K., HERBUŚ K.: The method of tuning the control algorithm of selected operating parameters of the AFC. Engineering Modelling ( Inż.) 2018 No. 66 p. 72-80, ISSN 1896-771X.
  42. TALAREK M.: Direct ignition tests of electrostatic discharges from non-conductive surfaces. Mining Machines (Masz. Gór.) 2018 No. 2 p. 3-12, ISSN 2450-9442.
  43. TOKARCZYK J., TUREWICZ A., DUDEK M., SZEWERDA K., PIECZORA E.: Computer aided process of configuration and evaluation of auxiliary mining transport means. Drives and Control (Napędy Sterow.) 2018 No. 7/8 p. 68, 70-75, ISSN 1507-7764.
  44. TUREWICZ K.: Selected problems of strength analysis of Koepe pulleys in hoisting machines by the FEM method. Mining Machines (Masz. Gór.) 2018 No. 4 p. 48-57, ISSN 2450-9442.
  45. WOSZCZYŃSKI M., JENDRYSIK S., ROGALA-ROJEK J., KANTY P., KUREK N.: Automation of testing the try load to columns strengthening the subsoil. Engineering and Construction (Inż. Bud.) 2018 No. 2 p. 84-86, ISSN 0021-0315.
  46. WOSZCZYŃSKI M.: Model of intelligent system for monitoring and diagnostics of photovoltaic panels. Drives and Control (Napędy Sterow.) 2018 No. 5 p. 70-73, ISSN 1507-7764.

 

Monographs

  1. BARTOSZEK S., KOST G.: Method for positioning of a roadheader in a roadway. KOMAG Research Projects - Monographs No. 55, Institute of Mining Technology KOMAG, Gliwice 2018 p. 1-164; 8,31 Publisher’s Sheet, ISBN 978-83-65593-13-9.
  2. GRABKA L., SPAŁEK J., SZWEDA S.: Identification of reliability of sealing nods for regenerated shafts of the mining machines driving gears. Innovative Mechanization Technologies and Techniques, Monograph No 20, Institute of Mining Technology KOMAG, Gliwice 2018 p. 1-133; 8,01 Publisher’s Sheet, ISBN 978-83-65593-15-3.
  3. JENDRYSIK S., KOST G.: Method for controlling the bucket conveyor in a jig beneficiation node. KOMAG Research Projects - Monographs No. 53, Institute of Mining Technology KOMAG, Gliwice 2018 p. 1-117; 6,28 Publisher’s Sheet, ISBN 978-83-65593-09-2.
  4. ORZECH Ł.: Acoustic method for testing the single electrostatic discharges. KOMAG Research Projects - Monographs No. 54, Institute of Mining Technology KOMAG, Gliwice 2018 p. 1-149; 8,37 Publisher’s Sheet, ISBN 978-83-65593-12-2.
  5. SIDOR J., KLICH A.: Modern machines for comminution – crushers and mills. Institute of Mining Technology KOMAG, Gliwice 2018 p. 1-393; 20,74 Publisher’s Sheet, ISBN 978-83-65593-10-8.
  6. SZEWERDA K., ŚWIDER J., HERBUŚ K.: Method of parameterisation and selection of control algorithms for AFC’s. KOMAG Research Projects - Monographs No. 56, Institute of Mining Technology KOMAG, Gliwice 2018 p. 1-220; 14,47 Publisher’s Sheet, ISBN 978-83-65593-14-6.

 

Chapters in Monographs

  1. BAŁAGA D., KALITA M., SIEGMUND M., URBANEK A., WALOSZCZYK A.: Conception of mist fire extinguishing system of belt conveyor drives. Work safety of transportation equipment in the mining industry. Monograph, scientific editorship: Andrzej Tytko, Marian Wójcik, Centrum Badań i Dozoru Górnictwa Podziemnego sp. z o.o., Lędziny 2018 p. 154-162; 0,60 Publisher’s Sheet, ISBN 978-83-936657-9-2.
  2. JENDRYSIK S., BALCARCZYK L.: Monitoring of resources and machines in a process of raw minerals recovery from mine heaps. Mineral Aggregates, Volume 2, Faculty of Geoengineering, Mining and Geology of Wrocław University of Technology, Wrocław 2018 p. 61-67; 0,46 Publisher’s Sheet, ISBN 978-83-946706-5-8.
  3. LUTYŃSKI A., LUTYŃSKI M., KSIĄŻKIEWICZ W., ŁADA J.: Current status of coal gasification development. KOMEKO 2018, Innovative and Environment-friendly Technologies and Techniques of Processing Mineral Raw Materials. Safety - Quality - Effectiveness Institute of Mining Technology KOMAG, Gliwice 2018 p. 116-134; 1,37 Publisher’s Sheet, ISBN 978-83-655993-11-5.
  4. MADEJCZYK W.: Stand test of powered roof supports unit and its components. Powered roof supports for rock burst hazard conditions. Multi-author collective work under Kazimierz Stoiński’s editorship. Główny Instytut Górnictwa, Katowice 2018 p. 39-71; 2,11 Publisher’s Sheet, ISBN 978-83-65503-09-1.
  5. MATUSIAK P., KOWOL D.: Use of intelligent solutions in production of mineral aggregates. Mineral Aggregates, Volume 2, Faculty of Geoengineering, Mining and Geology of Wrocław University of Technology, Wrocław 2018 p. 133-142; 0,57 Publisher’s Sheet, ISBN 978-83-946706-5-8.
  6. RYNDAK P., DŁUGAJ J., KOBYLECKI M., KOWAL L.: Pietrykowski Mining and Processing System in Belarus – comprehensive delivery of hoisting machines for deepening the shafts and run-of-mine transportation. KOMTECH 2018, Innovative Technologies and Techniques for Mining. Safety - Effectiveness - Reliability, KOMAG Institute of Mining Technology, Gliwice 2018 p. 69-82; 0,99 Publisher’s Sheet, ISBN 978-83-65593-16-0.

 

Papers in Conference Proceedings

  1. KURPIEL W., MIEDZIŃSKI B.: Properties of lithium cells under operating conditions. Conference Proceedings: SEMAG 2017, XXVI Scientific and Technical Symposium, Automation and Electropower in the Mining Industry, Mysłakowice n/Jelenia Góra,, 28-30 May 2018 p. 6-17, ISBN 978-83-947677-1-6.
  2. MALEC M.: Improvement of work safety in mines - results of KOMAG research projects. Conference Proceedings: 25th World Mining Congress, Innovation excellence - step forward to mining growth, Astana, Kazakhstan, 19-22 June 2018 p. 13 unpaginated.
  3. POLNIK B.: Universal electric drive system increasing the technical safety of mining machines. SEMAG 2017, XXVI Scientific and Technical Symposium, Automation and Electropower in the Mining Industry, Mysłakowice n/Jelenia Góra,, 28-30 May 2018 p. 28-36, ISBN 978-83-947677-1-6.

 

Papers in Conference Proceedings on Web of Science and Scopus

  1. KOWOL D., MATUSIAK P.: Technology of fine coal grains recovery from the mining waste deposits. Conference Proceedings: MEC 2018, Mineral Engineering Conference, Zawiercie, 26-29 September 2018 p. 1-12, ISSN 1757-899X.
  2. LESIAK K., BRZEŻAŃSKI M.: Concept of the exhaust system for diesel engines used in underground mining. Conference Proceedings: KONMOT 2018, International Automotive Conference, Krakow, September 13th-14th, 2018 p. 1-6, ISSN 1757-899X.
  3. MATUSIAK P., KOZIOŁ J.: Testing the reduction properties of coke produced from a mixture of hard coal and rubber wastes. Conference Proceedings: MEC 2018, Mineral Engineering Conference, Zawiercie, 26-29 September 2018 p. 1-8, ISSN 1757-899X.
  4. MICHALAK D., ROZMUS M., GOMEZ J., PAPEZ M., OSOJNIK V., BUENO D.R., ŚWIERCZEK G., LIMANOWSKA E.: Specialized training in 3D printing and practical use of acquired knowledge - 3DSPEC online course. Conference Proceedings: AHFE 2018, International Conference on Human Factors in Training, Education, and Learning Sciences, Orlando, USA, 21-25 July 2018 p. 339-350, ISBN 978-3-319-93882-0.
  5. ORZECH Ł., NIEDWOROK A.: Measurement of the charge transferred by a single electrostatic discharge by acoustic method. Conference Proceedings: ICSV 2018, 25th International Congress on Sound and Vibration, Hiroshima, Japan, 8-12 July 2018 p. 1-8, ISBN 978-151086845-8.
  6. POLNIK B.: An Innovative Power Supply System Dedicate for Roadheading Mining Machines. (ECS Transactions, 2018 No. 1). Conference Proceedings: ABAF 2018, 19th International Conference on Advanced Batteries, Accumulators and Fuel Cells, Brno, 26-29 August 2018 349-362, ISSN 1938-6737.
  7. PROSTAŃSKI D.: Development of research work in the air-water spraying area for reduction of methane and coal dust explosion hazard as well as for dust control in the Polish mining industry. Conference Proceedings: MEC 2018, Mineral Engineering Conference, Zawiercie, 26-29 September 2018 p. 1-13, ISSN 1757-899X.
  8. TOKARCZYK J., DUDEK M., JORDA O., MARTINEZ E., PENUELAS-HERRAIZ A., PRIMO-CAPELLA V.-J.: OVOMAX online course as w way to improve competencies and qualifications for designing and manufacturing of custom-made orthopaedic implants. Conference Proceedings: AHFE 2018, International Conference on Human Factors in Training, Education, and Learning Sciences, Orlando, USA, 21-25 July 2018 p. 362-374, ISBN 978-3-319-93882-0.

 

2017 year

Articles in Polish Magazines

  1. BAŁAGA D., KALITA M., SIEGMUND M.: Use of 3D additive manufacturing technology for rapid prototyping of spraying nozzles. Mining Machines (Masz. Gór.) 2017 No. 3 p. 3-13, ISSN 2450-9442 [full text in Polish].
  2. BARTOSZEK S., JURA M., JAGODA J., LIBERA K., SŁOWIŃSKI A.: The roadheader positioning system testing in experimental roadway. Mining Machines (Masz. Gór.) 2017 No. 2 p. 30-41, ISSN 2450-9442 [full text in Polish].
  3. BUDZYŃSKI Z.: Technical aspects of series production of electric cars. Drives and Control (Napędy Sterow.) 2017 No. 4 p. 106-111, ISSN 1507-7764 [full text in Polish].
  4. BUDZYŃSKI Z., DEJA P.: Power supply and control system of mining ventilation pipe fan with the output control function. Electric Machines, Exercise – Books of Problems (Masz. Elektr., Zesz. Probl.) 2017 No. 113 p. 171-175, ISSN 0239-3646 [full text in Polish].
  5. DEJA P.: Operating experience of the modernised electric underground locomotive type Ld-31EM. Mining Machines (Masz. Gór.) 2017 No. 1 p. 55-62, ISSN 2450-9442 [full text in Polish].
  6. DOBRZANIECKI P., KACZMARCZYK K.: Power supply systems for combustion engines used in coal mines at the example of ITG KOMAG solutions. Mining Machines (Masz. Gór.) 2017 No. 1 p. 63-76, ISSN 2450-9442 [full text in Polish].
  7. GONTARZ J., PODGÓRSKI J., KALITA M., SIEGMUND M.: Summary of laboratory tests of sandstone for pull-out test analysis. Constructions and Architecture (Budow. Archit.) 2017 No. 16, p. 113-123, ISSN 1899-0665 [full text in Polish].
  8. HERBUŚ K., SZEWERDA K., ŚWIDER J.: Identification of the computational model of the armoured face conveyor. Engineering Modelling (Model. Inż.) 2017 No. 65 p. 38-46, ISSN 1896-771X [full text in Polish].
  9. JAGODA J.: Attention measurement system of mining machine and equipment operators. Mining Machines (Masz. Gór.) 2017 No. 2 p. 71-80, ISSN 2450-9442 [full text in Polish].
  10. JAGODA J., ROGALA-ROJEK J.: Management of information about maintenance of machines and equipment in the aspect of changes in law regulations. Mining Machines (Masz. Gór.) 2017 No. 4 p. 52-63, ISSN 2450-9442 [full text in Polish].
  11. JASIULEK D., ROGALA-ROJEK J.: Innovative software solution for coal mines. Studia Informatica ( Informat.) 2017 No. 3 p. 45-56, ISSN 1642-0489.
  12. JEDZINIAK M.: Development of a small-size equipment for auxiliary ventilation and directions of its applications. Mining Engineering (Inż. Gór.) 2017 No. 3-4 p. 62-66, ISSN 2353-5490 [full text in Polish].
  13. JEDZINIAK M.: Determination of heat transfer coefficient of flexible ventubes. Mining Machines (Masz. Gór.) 2017 No. 1 p. 12-20, ISSN 2450-9442 [full text in Polish].
  14. JENDRYSIK S., BARTOSZEK S., JASIULEK D., GAWLIŃSKI A.: Control system for the bucket conveyor in the jig node of beneficiation system. Mining Machines (Masz. Gór.) 2017 No. 2 p. 53-61, ISSN 2450-9442 [full text in Polish].
  15. JURA J., BARTOSZEK S.: KOGASTER – electric installation for diesel drives. Mining Machines (Masz. Gór.) 2017 No. 4 p. 41-51, ISSN 2450-9442 [full text in Polish].
  16. JURA M.: Graphics library for the controller with an OLED display. Mining Machines (Masz. Gór. ) 2017 No. 2 s. 62-70, ISSN 2450-9442 [full text in Polish].
  17. JURA M., ROGALA-ROJEK J., JASIULEK D., JENDRYSIK S.: M-SmartGRID, the mine smart power grid. Mining Machines (Masz. Gór.) 2017 No. 4 p. 64-74, ISSN 2450-9442 [full text in Polish].
  18. KALITA M.: Propagation test of dust deposited in a roadway working. Common Issues (Wsp. Spr.) 2017 No. 3 p. 7-11, ISSN 1213-8078 [full text in Polish].
  19. KONSEK R.: Assesment of operational time of the mining machines with battery drive systems. Mining Machines (Masz. Gór.) 2017 No. 2 p. 24-29, ISSN 2450-9442 [full text in Polish].
  20. KONSEK R.: Electric drive of mine suspended railways. Electric Machines, Exercise – Books of Problems (Masz. Elektr., Zesz. Probl.) 2017 No. 113 p. 195-198, ISSN 0239-3646 [full text in Polish].
  21. KONSEK R.:. A determination of braking path of a mine locomotive basing on simulation tests. Drives and Control (Napędy Sterow.) 2017 No. 7/8 p. 118-121, ISSN 1507-7764 [full text in Polish].
  22. KOWOL D., MATUSIAK P., ŁAGÓDKA M.: Laboratory tests for efficiency of jig beneficiation of coal wastes of grain classes 35-3 mm and 35-0 mm. Mining Machines (Masz. Gór.) 2017 No. 2 p. 3-15, ISSN 2450-9442 [full text in Polish].
  23. LAZAR D., SZWEDA S.: Idea of the system for energy recovery from shaft pipeline. Mining Machines (Masz. Gór.) 2017 No. 3 p. 64-74, ISSN 2450-9442 [full text in Polish].
  24. LESIAK K.: Influence of temperature changes on explosion pressure measurement. Mining Machines (Masz. Gór.) 2017 No 1 p. 3-11, ISSN 2450-9442 [full text in Polish].
  25. LESIAK K., BRZEŻAŃSKI M.: Concept of the exhaust system of combustion engines used in underground mining. Engines 2017 No. 2 p. 97-100, ISSN 2300-9896.
  26. LUTYŃSKI A.: Noise hazard in hard coal mechanical processing plants. Mining Machines (Masz. Gór.) 2017 No. 4 p. 15-22, ISSN 2450-9442 [full text in Polish].
  27. LUTYŃSKI A., PROSTAŃSKI D.: Dust hazard control in coal preparation plants. Mining Engineering (Inż. Gór.) 2017 No. 3-4 p. 44-51, ISSN 2353-5490 [full text in Polish].
  28. MAJEWSKI M.: Identification of hazards as one of stages of designing the mining machines. Mining Machines (Masz. Gór.) 2017 No. 3 p. 27-43, ISSN 2450-9442 [full text in Polish].
  29. MATUSIAK P., KOWOL D.: Technology of recycling coal from mining waste through implementation of KOMAG device. Mining Machines (Masz. Gór.) 2017 No. 2 p. 42-52, ISSN 2450-9442 [full text in Polish].
  30. NIEDWOROK A.: Impact of static and alternating magnetic field on warming up of components fixing the electric wires. Electrotechnical Survey ( Elektrotech.) 2017 No. 7 p. 60-63, ISSN 0033-2097.
  31. NIEŚPIAŁOWSKI K., WÓJCICKI M., ROSA M.: Concept of a cleaning device for run-of-mine transportation cars. Mining Machines (Masz. Gór.) 2017 No. 4 p. 23-29, ISSN 2450-9442 [full text in Polish].
  32. PIECZORA E., SUFFNER H.: Development of drives for underground suspended monorails. Mining Machines (Masz. Gór.) 2017 No. 3 p. 44-57, ISSN 2450-9442 [full text in Polish].
  33. PIECZORA E., TOKARCZYK J.: Development of mine underground transportation with use of suspended monorails. Mining – Informatics, Automation and Electrical Engineering 2017 No. 4 p. 96-106, ISSN 2449-6421.
  34. POLNIK B.: Safe use of lithium cells in mining machines and equipment operating in the areas with a potential explosion hazard. Drives and Control (Napędy Sterow.) 2017 No. 1 p. 58-65, ISSN 1507-7764 [full text in Polish].
  35. POLNIK B., KURPIEL W., JUSZCZYK Z.: Autonomous system for monitoring lead-acid battery parameter. Mining Machines (Masz. Gór.) 2017 No. 3 p. 58-64, ISSN 2450-9442 [full text in Polish].
  36. PROSTAŃSKI D.: Empirical models of zones protecting against coal dust explosion. Mining Archives ( Gór.) 2017 No. 3 p. 611-619, ISSN 0860-7001 .
  37. ROGALA-ROJEK J., JENDRYSIK S., JURA M., JASIULEK D.: Smart system for electric grid management in coal mines. Studia Informatica 2017 No. 3 p. 101-114, ISSN 1642-0489.
  38. RYNDAK P., MICHALSKI W., KOWAL L., TUREWICZ K.: Mobile container platform – an innovative solution of vertical transport. Mining Engineering (Inż. Gór.) 2017 No. 3-4 p. 52-55, ISSN 2353-5490 [full text in Polish].
  39. SIEGMUND M., JONAK J.: Analysis of the results of preliminary studies and determination of direction of further research work on technology of drilling the rescue tunnels by the method of mechanical loosening. Cuprum 2017 No. 1 p. 57-71, ISSN 0137-2815 [full text in Polish].
  40. SZEWERDA K., ŚWIDER J., HERBUŚ K.: Impact of the selected parameters’ adjustment on operational conditions of flight-bar conveyor. Mining Machines (Masz. Gór.) 2017 No. 4 p. 30-40, ISSN 2450-9442 [full text in Polish].
  41. SZYGUŁA M., STĘPOR J., MOSTEK W., LEBDA-WYBORNY Z., KAZUBIŃSKI D.: Adaptation of the HYDROMEL-16/35-POz powered roof support unit to changing operating conditions. Mining Machines (Masz. Gór.) 2017 No. 1 p. 31-44, ISSN 2450-9442 [full text in Polish].
  42. WIECZOREK A., ROZMUS M.: Possibilities and needs in application of CMMMS class systems in hospital. Systems Supporting Production Engineering, Problems of Environmental Management (Syst. Wspomag. Inż. Prod., Probl. Zarz. Śr.) 2017 No. 1 p. 34-44, ISSN 2391-9361 [full text in Polish].
  43. WOSZCZYŃSKI M.: Model of intelligent system for monitoring and diagnostics of photovoltaic panels. Electric Machines, Exercise – Books of Problems (Masz. Elektr., Zesz. Probl.) 2017 No. 114 s. 33-37, ISSN 0239-3646 [full text in Polish].
  44. ZAJĄC R.: Internal Audit in Improvement of Management System - Results of Questionnaire Inquiries. Quality Problems (Probl. Jakości) 2017 No. 6 p. 32-37, ISSN 0137-8651 [full text in Polish].
  45. ZAJĄC R.: Risk-based approach in the light of requirements of PN-EN ISO 9001:2015-10 Standard. Mining Machines (Masz. Gór.) 2017 No.3 p. 75-86, ISSN 2450-9442 [full text in Polish].

 

Articles in foreign magazines

  1. TALAREK M., KACPRZYK R.: Direct ignition tests of brush discharges for explosive methane-air and propane-air gas mixtures. Electrost. 2017 nr 88 s. 165-170, ISSN 0304-3886.

 

Monographs

  1. KŁECZEK Z.: Bumps in hard coal mines and in copper ore mines in Poland. Innovative Mechanization Technologies and Techniques, Monograph No. 19, Institute of Mining Technology KOMAG, Gliwice 2017 p. 1-112; 6,20 Publisher’s Sheet, ISBN 978-83-65593-04-7 [full text in Polish].
  2. KONSEK R., MĘŻYK A.: Methodology for selection of operating point of an engine in a hybrid drive with use of simulation models. KOMAG Research Projects - Monographs No. 50, Institute of Mining Technology KOMAG, Gliwice 2017 p. 1-107; 6,40 Publisher’s Sheet, ISBN 978-83-65593-06-1 [full text in Polish].
  3. LUTYŃSKI A.: Prevention of methane, dust and noise hazards in preparation plants of coal mines. Innovative Mechanization Technologies and Techniques, Monograph No. 18, Institute of Mining Technology KOMAG, Gliwice 2017 p. 1-126; 7,00 Publisher’s Sheet, ISBN 978-83-65593-03-0 [full text in Polish].
  4. PROSTAŃSKI D.: Air-water spraying method for reducing the methane and coal dust explosion hazard as well as for reducing the airborne dust concentration. KOMAG Research Projects - Monographs No. 51, Institute of Mining Technology KOMAG, Gliwice 2017 p. 1-193; 9,92 Publisher’s Sheet, ISBN 978-83-65593-07-8 [full text in Polish].
  5. TOKARCZYK J.: Methodology for identifying the selected mechanical hazards in auxiliary transport of underground mines. KOMAG Research Projects - Monographs No. 52, Institute of Mining Technology KOMAG, Gliwice 2017 s. 1-148; 7,48 Publisher’s Sheet, ISBN 978-83-65593-08-5 [full text in Polish].

 

Chapters in Monographs

  1. BAŁAGA D., SIEGMUND M., KALITA M.: Air-water system for dust control at the coal feeding installation in “Łagisza” Power Plant. Problems of exploitation and management in mining. Monograph. Scientific Editorship: Ass. Prof. Krzysztof Kotwica, AGH - University of Science and Technology named after Stanisław Staszic, Cracow 2017 p. 27-36; 0,83 Publisher’s Sheet, ISBN 978-83-930353-7-3 [full text in Polish].
  2. BARON R.:. Identification of the sound level at the selected workplaces in the coal preparation plant. KOMEKO 2017, Innovative and Environment-friendly Technologies and Techniques of Processing Mineral Raw Materials. Safety - Quality - Effectiveness. Institute of Mining Technology KOMAG, Gliwice 2017 p. 126-139; 0,75 Publisher’s Sheet, ISBN 978-83-65593-02-3 [full text in Polish].
  3. CIERPISZ S., KOWOL D.: Methods of the feed stabilization in the process of coal benefication. KOMEKO 2017, Innovative and Environment-friendly Technologies and Techniques of Processing Mineral Raw Materials. Safety - Quality - Effectiveness. Institute of Mining Technology KOMAG, Gliwice 2017 p. 96-114; 1,17 Publisher’s Sheet, ISBN 978-83-65593-02-3 [full text in Polish].
  4. LUTYŃSKI A., LUTYŃSKI M.: Application of coal slurries in gasification technologies. KOMEKO 2017, Innovative and Environment-friendly Technologies and Techniques of Processing Mineral Raw Materials. Safety - Quality - Effectiveness. Institute of Mining Technology KOMAG, Gliwice 2017 p. 140-156; 1,13 Publisher’s Sheet, ISBN 978-83-65593-02-3 [full text in Polish].
  5. LUTYŃSKI A., PROSTAŃSKI D: Mitigation of hazards caused by coal dust at plants for mechanical processing of coal at hard coal mines. Mechanization, Automation and Robotization in Mining. Monograph. Scientific Editorship: Prof. Krzysztof Kotwica, Volume 1, (Centre for Tests and Supervision of Underground Mining, Ltd.), Lędziny, Cracow 2017 p. 91-103; 1,5 Publisher’s Sheet, ISBN 978-83-944406-9-5 [full text in Polish].
  6. MATUSIAK P., KOWOL D.: Process water treatment in the beneficiation node of mine waste dum. Mineral Aggregates, Volume 1, Faculty of Geoengineering, Mining and Geology of Wrocław University of Technology, Wrocław 2017 p. 113-122; 0,61 Publisher’s Sheet, ISSN 0342-9673 [full text in Polish].
  7. PIECZORA E., SUFFNER H.: Is there an end to the use of diesel suspended monorails in the mining industry? State-of-the-art techniques and safety in the mining industry. Monograph. Scientific Editorship: Ass. Prof. Krzysztof Kotwica, AGH – University of Science and Technology named after Stanisław Staszic, Cracow 2017 p. 241-252; 1,00 Publisher’s Sheet, ISBN 978-83-930353-3-5 [full text in Polish].
  8. RYNDAK P., MICHALSKI W., KOWAL L., TUREWICZ K.: Mobile container platform – an innovative solution of vertical transport. KOMTECH 2017, Innovative Technologies and Techniques for Mining. Safety - Effectiveness - Reliability, KOMAG Institute of Mining Technology, Gliwice 2017 p. 23-29; 0,50 Publisher’s Sheet, ISBN 978-83-65593-05-4 [full text in Polish].

 

Papers in Conference Proceedings

  1. BAŁAGA D., KALITA M., SIEGMUND M., URBANEK A., WALOSZCZYK A.: Automatic system for mist fire-extinguishing of belt-conveyors’ drives. Conference Proceeding: Problems of Safety and Health Protection in the Polish Mining Industry, XIX Conference, Szczyrk-Biła, 4-5 April 2017 p. 1-11 [full text in Polish].
  2. BARTNICKA J., PIEDRABUENA A., PORTILLA R., MOYANO-CUEVAS J.L., PAGADOR J.B., SANCHEZ-MARGALLO F.M., AUGAT P., MICHALAK D., TOKARCZYK J.: Train4OrthoMIS online course as a manner of improving ergonomics in orthopaedic surgery. Conference Proceedings: AHFE 2017, International Conferences on Human Factors and Ergonomics in Healthcare and Medical Devices, Los Angeles, USA, 17-21 July 2017 p.10 unpaginated, ISBN 978-331960482-4.
  3. JENDRYSIK S., WOSZCZYŃSKI M., JASIULEK D.: Control of a jig beneficiation node system. Conference Proceedings: IV Polish Mining Congress, Cracow, 20-22.11.2017 p.531-537 [full text in Polish].
  4. KOWOL D., MATUSIAK P.: Impact the selected parameters on effectiveness of beneficiation process in water pulsating jigs. Conference Proceedings: IV Polish Mining Congress, Cracow, 20-22.11.2017 p. 620-629 [full text in Polish].
  5. KURPIEL W.: Life and operational safety of lithium cells with an active balancing system in the supply systems of mining machines operating in explosive atmosphere. Conference Proceedings: SEMAG 2017, XXIII Scientific and Technical Symposium, Automation and Electropower in the Mining Industry, Mysłakowice n/Jelenia Góra, 29-31 May 2017 p. 6-22, ISBN 978-83-947677-0-9 [full text in Polish].
  6. MATUSIAK P., KOWOL D.: Implementation of KOMAG type devices for recovery of mineral from mine wastes. Conference Proceedings: IV Polish Mining Congress, Cracow, 20-22.11.2017 p. 986-995 [full text in Polish].


Papers in Conference Proceedings on Web of Science

  1. GONTARZ J., PODGÓRSKI J., SIEGMUND M.: Comparison of crack propagation analyses in a pull-out test. Conference Proceedings: CMM 2017, 22nd International Conference on Computer Methods in Mechanics, Lublin, 13-16 September 2017 p. 130011-1-130011-8, ISBN 978-0-7354-1614-7; ISSN 0094-243X.
  2. NIEDWOROK A., ORZECH Ł.: Determination of efficiency and thermal properties of drive equipped with induction motor and drive equipped with synchronous reluctance motor. Conference Proceedings: The 19th European Conference on Power Electronics and Applications, EPE '17 ECCE Europe, Warsaw, Poland, 11-14 September 2017 p. 1-9, ISBN 9789075815269.
  3. POLNIK B., KURPIEL W., JUSZCZYK Z.: Autonomous system for monitoring lead-acid battery parameters dedicated to use in the mine battery locomotive. (ECS Transactions, 2017 No. 1). Conference Proceedings: ABAF 2017, 18th International Conference on Advanced Batteries, Accumulators and Fuel Cells, Brno, 10-13 September 2017 p. 233-239, ISSN 1938-5862.

 

 

 

    You are here:  
  1. Home
  2. Science
  3. Researchers’ Publications
© 2024 KOMAG Institute of Mining Technology