KOMAG Institute of Mining Technology

MISSION

Innovative solutions for economy.

VISION
Research and development centre of organizational and proprietary structure adapted to the market activity in the European Research Area and of the organizational culture creating a friendly climate for generating new ideas and realizing innovative activities, i.e. transforming new ideas into new products.
Read more

Design

Designing of machines and equipment

Tests

Laboratory of Applied Tests

Certification

Assessment of products' conformity

Projects

Projects realized by the KOMAG Institute from European Funds

A scientific-and-technical quarterly, published by the KOMAG Institute of Mining Technology for over 30 years, is a magazine which presents scientific, research-and-development and implementation projects in the domain of mining mechanization, especially as regards the following:

  • underground mechanization systems in mines,
  • mechanical processing,
  • impact of mechanization systems on the environment,
  • man-machine ergonomic relationships,
  • as well as projects on the environmental protection, safety, work ergonomics, certification and standardization.

Articles written by scientists from institutes and universities, employees from research-and-development centres as well as mine technical personnel and manufacturers of machines are presented in the quarterly.

Contact
Phone: 
Managing Editor 48 32 2374 177

E-mail: 
This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Numerical simulation of mixing and aeration of flotation suspension in the chamber of pneumo-mechanical flotation machine
    GICALA B., LENARTOWICZ M.
  • Vibrating movements and screening process on two-frequency screen deck
    MODRZEWSKI R., WODZIŃSKI P.
  • Use of sieves of high capacity in classification line as well as in beneficiation of fine and very fine grains
    ROLNIK R.
  • Analysis of acoustic field distribution in the environment of selected power objects
    AUGUSTYN A.
  • Analysis of process of servicing repairs of mining machines
    ROZMUS M.
  • Modernization of mining industry and new occupational hazards associated with emission of magnetic fields
    FIRCZYK W., BUDZYŃSKI Z.
  • Requirements as regards measuring-and-research equipment at accredited testing laboratories
    ZAJĄC R., WOJTASZCZYK M.
  • New priorities, rules for application and realization of projects in research programme of the Research Fund for Coal and Steel in the light of decision of Board dated 29th April 2008
    HORDYNIAK E., DUDZIAK M.

  • Results of tests of electrohydraulic servo-drive with adaptative controller
    DINDORF R., WOŚ P.
  • Test stand for tests of hydrotronic driving systems operating in CAN-bus system
    BARTNICKI A., TYPIAK A.
  • Losses and power balance in hydraulic satellite engines supplied with HFA-E emulsion and oil
    ŚLIWIŃSKI P.
  • Optimization of design features of mechatronic drive systems of mining machines
    Świtoński E., Chuchnowski W.
  • Self-propelled drilling-and-loading car for the coal mining industry
    KALUKIEWICZ A., MARIANOWSKI J., GREGOREK K., KOCOT L., NIECHWIADOWICZ J., KIPCZAK P.
  • Concept of pneumatic-and-hydraulic rotary-and-percussive drill
    NIEŚPIAŁOWSKI K., JASIULEK T.
  • Making the technical manual documentation of new generation available with the use of RFID technology
    WINKLER T., MICHALAK D., JASZCZYK Ł., ROGALA J.
  • The use of PRO-M software for assessment of hazard of ignition of machines designed for operation in the areas of explosion hazard
    FIGIEL A., DUDEK M., PUCHAŁA B.

  • Comparison of methods for powered roof supports testing according to European, American and Russian standards
    MADEJCZYK W.
  • Designing of gear modules of internal meshing according to the requirements of ISO standards 
    CZADER W., PIECZORA E., DREWNIAK J.
  • Results of cavitation in machines with a hydrostatic drive 
    KOLLEK W., KUDŹMA Z., OSIŃSKI P., PALCZAK E., STOSIAK M.
  • Use of artificial intelligence to control road header cutter jib movements 
    ROGALA J.
  • Analysis of dynamic loads of flight-bar conveyors on the basis of tests carried out in operational conditions 
    SUCHOŃ J., DRWIĘGA A., GĄSIOR S.
  • Development of flight bar designs and prospects of further research and development work
    KALUKIEWICZ A., WITWICKI S.
  • Identification of technical-and-operational parameters of belt conveyors using mobile measuring system 
    KULINOWSKI P.
  • MWW-1 small-size drilling jumbo 
    PROSTAŃSKI D., KALITA M.
  • GMC-1000 cooling device for underground mine air condition system
    KALUKIEWICZ A., GOSPODARCZYK P., WOJCIECHOWSKI J., BIELAK D., GREGOREK K., KRUCZEK S., LEBDA-WYBORNY Z., WERESZCZYŃSKI L., WÓJCIK A.
  • Review of available technologies for taking measurement and control of parameters of separation of suspensions process in minerals processing 
    LENARTOWICZ M., KOWAL D., ŁAGÓDKA M.

  • Numerical simulation of temperature distribution of gear body
    GICALA B.
  • Impact of additional pre-rotation of sucked stream on liquid speed field in beforeimpeller zone of centrifugal pump 
    MIKOŚ M., KARCH M.
  • Designing and research project in the field of dedicated measuring instrumentation in the Laboratory of Applied Tests of KOMAG Institute of Mining Technology 
    NIEDWOROK A..
  • Analysis of carbon concentration in a surface layer of steel prepared for steel cementation
    WĘGRZYN T., WIECZOREK A., ŻOŁNIERZ M.
  • Analysis of factors that have an impact on roadheader mining capacity 
    JONAK J., ROGALA – ROJEK J.
  • ŁJK-1200 mining loader manufactured on the basis of refitted components 
    CEBULA D., KALITA M., PROSTAŃSKI D., WYROBEK E.
  • Operational problems of loose materials sampling
    TOMAS A., WIECZOREK A.
  • Low noise emission ventilation system for the objects of strategic meaning
    Pierchała M.

  • Measurements of temperature of brake disks in hoisting machines of mine shaft hoists
    KOWAL L., TUREWICZ K., KRUCZEK T.
  • Assessment of condition of welded joints in the components of powered roof support as well as of forgings of hooks and slings with use of non-destructive tests
    RAKWIC B., WOJTYNEK R.
  • Testing the distribution of electrostatic potential on the surface of solid dielectric materials
    TALAREK M.
  • Magnetic interactions in drive transmission technology
    TOMAS A.
  • Selected problems of safety of mine shaft hoists
    BARAŃSKA H., ZYGMUNT A., SZCZYGIEŁ M.
  • Reduction of noise of selected mining machines and equipment
    ŚLUSAREK A.
  • New solutions of spraying devices eliminating dust hazard in the mining industry
    BAŁAGA D., SIEGMUND M., URBANEK A.
  • Technical requirements for hoses and hydraulic pipes strengthened with wire, which are used in drives and hydraulic control systems of mining machines and equipment
    ZAJĄC R., WIERZBICKA D., CZERNIAK D.

 

Page 5 of 10

Recommended

 
 

 
 
Badanie bezpieczeństwa wyrobów
 

Klaster Maszyn Górniczych

 
    You are here:  
  1. Home
  2. Publications
  3. Maszyny Górnicze
© 2024 KOMAG Institute of Mining Technology