KOMAG Institute of Mining Technology

MISSION

Innovative solutions for economy.

VISION
Research and development centre of organizational and proprietary structure adapted to the market activity in the European Research Area and of the organizational culture creating a friendly climate for generating new ideas and realizing innovative activities, i.e. transforming new ideas into new products.
Read more

Design

Designing of machines and equipment

Tests

Laboratory of Applied Tests

Certification

Assessment of products' conformity

Projects

Projects realized by the KOMAG Institute from European Funds

A scientific-and-technical quarterly, published by the KOMAG Institute of Mining Technology for over 30 years, is a magazine which presents scientific, research-and-development and implementation projects in the domain of mining mechanization, especially as regards the following:

  • underground mechanization systems in mines,
  • mechanical processing,
  • impact of mechanization systems on the environment,
  • man-machine ergonomic relationships,
  • as well as projects on the environmental protection, safety, work ergonomics, certification and standardization.

Articles written by scientists from institutes and universities, employees from research-and-development centres as well as mine technical personnel and manufacturers of machines are presented in the quarterly.

Contact
Phone: 
Managing Editor 48 32 2374 177

E-mail: 
This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Virtual prototyping of operator’s cabin in CLS-120 floor-mounted railway in the light of safety criterion
    Chuchnowski W., Tokarczyk J., Szewerda K., Turewicz A.
  • Reasons of failures of control hydraulics components and suggestion as regards their minimization 
    Gil J., Kubiesa R., Stoiński K.
  • Australian Longwall Coal Mining 2008 
    Smolnik G.
  • Testing and assessment of hoisting machines and shaft signaling devices on the basis of free-program-mable controllers
    Cholewa J., Hałupczok P., Małecki J.
  • The development of vibratory tube mills 
    Sidor J., Tomach P.
  • Laboratory tests of impact of parameters of screen deck on distribution of material in pulsatory jig depending on feed characteristics
    Kowol D., Lenartowicz M., Łagódka M.
  • Methods of recovery and processing of thermal energy 
    Woszczyński M., Stankiewicz K.
  • Selection of suppliers in the aspect of quality processes on the example of PN-EN ISO 9001:2009 Standard 
    Zając R., Zając A.
  • Actions of Coal and Steel Fund for development of innovative technologies in the mining industry 
    Hordyniak E.

  • Tests of drive systems of machines with yielding couplings  
    Filipowicz K.
  • Operation of lifting conveyor used on downward transportation routes in “Marcel” Colliery 
    Lutyński A., Kozubek A.
  • System of air-water spraying installation in road- headers manufactured by REMAG
    Libera K., Puchała B., Prostański D., Bałaga D.
  • Concept of adaptive control system in roadheaders manufactured by REMAG, JSC
    Jonak J., Prostański D., Jasiulek D., Rogala-Rojek J., Puchała B.
  • Use of biodegradable substances as components of coal flotation agent 
    Grynkiewicz-Bylina B., Rakwic B.
  • Impact of new designs of vibrating centrifuges on the efficiency of dewatering of coal fines 20–0 mm 
    Matusiak P., Bal M., Łagódka M., Lenartowicz M., Kowol D.
  • Multimedia training materials for hard coal mines – assessment of present condition and development trends
    Michalak D., Rozmus M.

 

  • Air-and-water spraying system for roadheaders and shearers – solution which is still improved
    PROSTAŃSKI D., BAŁAGA D., ROJEK P., SEDLACZEK J.
  • Problems of safety of transportation with the use of floor-mounted railways and suspended monorails in inclined workings
    DRWIĘGA A., JANAS S., SUFFNER H.]
  • Loading of suspensions of coveyances during start-up of mining hoisting machine against a background of conducted experiment
    WOLNY S.
  • Challenges and development tendencies in mechanization of hard coal mining industry
    SIKORA W.
  • From the margin to the top – development of longwall mining system for coal seams in the usa within three decades
    SMOLNIK G.
  • Use of cross analysis of impacts in foresight projects on the example of human resources for machine industry
    KIEŁTYKA A.
  • Ensuring the quality of manufacturing of equipment designed for operation in areas of explosion hazard in the aspect of requirements of PN-EN 13980:2004 Standard
    ZAJĄC R., FIGIEL A.
  • Communication management – importance of internal information-and-communication
    SKOŁUD B., DYMAREK E.

  • The use of numerical fluid mechanics for modelling of heat exchange in a cooler of arm of high power long wall shearer
    GICALA B., TARKOWSKI A.
  • Laboratory tests of powered-roof support in the aspect of meeting the requirements included in Enclosure No. 4 to a Decree of Ministry of Economy dated 28th June 2002
    MADEJCZYK W.
  • Experimental verification of FEM model of hydraulic leg with gas accumulator
    MAZUREK K., SZWEDA S.
  • Example of using the measuring signals from a monitoring system for analysis of load of longwall shearer’s drives
    JASZCZUK M., KOTORC R.
  • Air-and-water spraying as a new method to control dust and methane hazards, which is used in Polish longwall shearers and road headers
    PROSTAŃSKI D., BAŁAGA D., ROJEK P., SEDLACZEK J.
  • Decomposition in control systems of hard coal mine processing plants
    FIRCZYK W.
  • The use of additional vortex of sucked stream for creation of characteristics of impeller pump
    MIKOŚ M., KALUKIEWICZ A., KARCH M.
  • Reduction of above-standard emission of noise from fans of high power
    PIERCHAŁA M.
  • System for monitoring of environmental technologies
    JEDZINIAK M., KRUPANEK J.
  • Assessment of services’ quality by evaluation of customer’s satisfaction
    ZAJĄC R., MALCZYK S.

  • Simulation of air-water mist propagation in spraying system
    CHUCHNOWSKI W., TOKARCZYK J.
  • Impact of design features of the leg on yield characteristics of powered roof support
    JASZCZUK M., PAWLIKOWSKI A.
  • Virtual prototyping of roadheader control system
    JSIULEK D., ŚWIDER J.
  • New KOMAG pulsation water jigs in installations for hard coal and mineral aggregates processing
    OSOBA D.
  • Control system for KOMAG jig
    TEJSZERSKI J., JASIULEK D., PAJĄK T. OSOBA M.
  • Model of dust pollutants propagation and environmental measurements – comparison on the example of Lodz city
    LOSTER A.
  • Control system for KOMAG jig
    TEJSZERSKI J., JASIULEK D., PAJĄK T. OSOBA M.
  • Scenarios of development of mechanization technology in the mining industry till 2020 according to experts’ opinion
    KOZIEŁ A., MAZURKIEWICZ T.

Page 7 of 10

Recommended

 
 

 
 
Badanie bezpieczeństwa wyrobów
 

Klaster Maszyn Górniczych

 
    You are here:  
  1. Home
  2. Publications
  3. Maszyny Górnicze
© 2024 KOMAG Institute of Mining Technology